Home
Contents
Company
Profile
Finishing
Systems
Burners
Cell
Washers
Railroad
Products
Residential
Products
Fabrication/
Welding
Finishing Systems
Below is a typical drum washer which was manufactured for a pharmaceutical company. The washer is all stainless steel construction, with stainless pumps and blowers as well. Steam heat for the tanks was utilized, with electric heat for the drier. Three stages performed the required functions, Wash - Rinse - Heated Dry. Drums are loaded upside down, with the lids set into fixtures between. This machine was also required to pass through a corridor which measured 8'-0" x 8'-0". Fabrication was a challenge, as the washer, including the rotating table, is flanged and bolted where necessary to fit. The load and unload stations are together in the same place, and can be done by the same worker.
This really turned out to be a nice little washer, and the customer is very pleased with it's performance!
| Home | Contents | Company Profile | Finishing Systems |
Burners |Cell
Washers | Railroad Products |
| Residential Products | Fabricating/Welding | Maintenance
| Material
Handling | |Consulting Service | Contact Us | Links |
8918 Glendale-Milford Road - Loveland, Ohio 45140